As the largest independent importer of electric motors in the USA, WorldWide Electric Corporation sells electric motors, motor controls and shaft mount / worm gear reducers from an expansive national inventory to qualified dealers, distributors and select OEMs at factory-direct prices. (*Not all products offered from WorldWide Electric Corporation are listed below, please contact sales for more detailed product offerings.)

WorldWide LV Motors

General Purpose-Single-Phase

  • 1/3-2 HP
  • 3600 and 1800 RPM
  • 115/208-230 volt
  • TEFC enclosure
  • 1.15 service factor
  • Class F insulation
  • C-face – removable base
  • Capacitor start / induction run (1/3-1 HP)
  • Capacitor start / capacitor run (1.5-2 HP) for reduced amperage and high torque
  • Shaft slinger to keep moisture and contaminants from the drive-end bearing

Vertical Hollow Shaft Motors

  • 25 – 250 HP
  • 1800 RPM
  • 230/460 volt (25 – 75 HP)
  • 460 volt PWS (100 – 250 HP)
  • WPI enclosure with rodent screen protection (25-250 HP)
  • 1.15 service factor
  • Class F insulation
  • Vertical P base
  • High efficiency
  • 120 volt space heaters

Hyundai LV Motors

Rigid Base

  • 1-600 HP
  • 3600, 1800 and 1200 RPM
  • 208-230/460 volt (1-125 HP)
  • 460 volt (150-250 HP)
  • TEFC enclosure
  • Dual rated service factor 1.15 for 40°C / 1.0 for 65°C
  • Class F insulation with Class N varnish
  • Rigid base
  • Premium Efficiency, meets or exceeds EISA 2007 requirements defined in NEMA MG-1 table 12-12
  • 5-year warranty
  • NEMA Design B
  • Cast iron frame and conduit box
  • Suitable for part winding start on low voltage (1-125 HP)
  • Suitable for wye-delta start (15-250 HP)
  • Inverter ready, 10:1 CT / 20:1 VT
  • Double drilled feet to accommodate mounting flexibility (324T-449T)
  • F2 field mountable
  • Class I, Division 2, Groups A, B, C, D
  • CC # 038A
  • Suitable for 50 hz operation with 1.0 service factor (1-150 HP)

 

Severe Duty Large Frame Motors

  • 250-600 HP
  • 3600, 1800 and 1200 RPM
  • Single voltage, 460 volt
  • Dual frequency rated 50/60 hz nameplate
  • TEFC enclosure
  • IP55 degree of protection
  • 1.15 service factor, 40°C ambient
  • Class F insulation
  • Class B temperature rise
  • Rigid base
  • Premium efficiency
  • 3 year warranty
  • Cast iron frame and conduit box
  • Heavy rolled steel fan cover
  • Ground lug in terminal box
  • Cast iron inner bearing caps
  • Double drilled feet
  • Bi-directional for 1800 and 1200 RPM ratings
  • Uni-directional (CCW) for 3600 RPM ratings, each motor shipped with extra fan for directional change
  • CSA Certified for Class I, Division 2, Groups A, B, C, D
  • Inverter ready, 10:1 CT / 20:1 VT
  • Inverter shield insulation and inverter grade magnet wire meets or exceeds NEMA MG-1 Part 31 for exceptional corona and transient protection

Hyundai Medium Voltage Motors

  • 350 – 1200 HP
  • 3600, 1800, 1200 and 900 RPM
  • Dual voltage 2300/4160
  • TEFC enclosure, cast iron construction
  • NEMA design B, continuous duty
  • Form wound stator coils
  • Class F insulation – Vacuum Pressure Impregnation
  • Class B temperature rise unless otherwise noted
  • Copper bar rotor
  • 1.15 service factor
  • Maximum 40°C ambient temperature
  • 100 ohm platinum stator RTDs (2 per phase)
  • 120 volt space heaters
  • Frame grounding provisions, ground lug in main terminal box
  • Multiple 2F mounting holes
  • 18/24 month warranty
  • Tapped holes for vertical jackscrews
  • VFD rated when using 1.0 service factor
  • Oversized main terminal box with stress relief
  • Bi-directional for 1800, 1200 and 900 RPM ratings
  • 85 dBA at 1 meter

Variable Frequency Drives

230 Volt, Single-Phase

The HYUNDAI N700E Series High Performance Drives offer powerful control solutions with exceptional speed control and torque response which provides superior vector performance.

The N700E’s compact size and sensorless vector control technology provides perfectly optimized performance for industrial and commercial applications.

Certificates of international standards (UL/cUL, CE) for the N700E series make it perfect for global applications. Compatible with the most common loads such as: fans, blowers, compressors, pumps, mixers, agitators, feeders, centrifuges, cranes, hoists, presses, sa14, extruders, and textile spinning machines.

  • Sensorless Vector Control
  • 0.01-400hz
  • 150% overload for one minute, CT applications
  • 120% overload for one minute, VT applications
  • 3000 second accel/decel
  • DC braking
  • Auto-tuning
  • BDR brake function
  • AVR function
  • Sixteen level multi-speed
  • Adjustable carrier frequencies
  • PID control
  • Frequency jump
  • Analog gain bias
  • Jog run
  • Electronic thermal overload
  • Auto-torque boost, trip history monitor and software lock
  • 50°C ambient
  • Speed search function
  • Intelligent input function
  • RS485 – Modbus communications

Multifunction Keypad

This product is READY TO RUN. You can access any parameters on any drive. PID setting drive copy lets you save all drive parameters in the keypad so you can easily load them back on the drive. You can also see your transducer in PSI units.

  • Multiline multifunctional backlit LCD display
  • Extended I/O availability:
    • 12 digital DC inputs
    • 4 analog inputs
    • 6 relay outputs
  • Keypad operation:
    • Start / Stop
    • Hand / Auto
    • Forward / Reverse (soft key)
    • 4 function keys for custom operation
  • User friendly interface:
    • Plain English programming
    • Parameter menu for intuitive navigation
    • Numeric keypad for direct data input
    • Text based parameter settings
  • Detailed trip information:
    • Identifies source of error
    • Detailed current, frequency and DC link voltage at time of trip
    • Time stamped trip history for three most recent trips
  • PID scaling and set point limits:
    • Set transducer range in PSI
    • Set limit on PID set point
  • User set memory:
    • Save drive settings to the keypad for download at later time
  • I/O monitoring:
    • View input and output terminal status, as well as analog voltage and current input, from a single screen
  • PID loop
  • Speed control potentiometer
  • Pump jack application firmware
  • 24/7 timer for automatic control
  • Dual speed control limit switch input

Soft Starters

WWEHD Heavy Duty Reduced Voltage Soft Starters

  • Three wire in, three wire out installation
  • Service Entrance Rated
  • Integral bypass contactors are standard on all sizes
  • Over current capacity : 500% for 60 seconds
  • Real-time thermal modeling and dynamic thermal register continuously calculates motor operating temperature even when your motor is not running
  • Phase loss protection based on current and voltage
  • Separate across the line overload protection
  • Load loss trip (under current) with trip delay
  • Pre-start checks for shorted load prior to each start
  • Two programmable overload trip curves allow for the thermal capacity required to start the load while providing more closely matched overload protection during the run time
  • PTC thermistor input for use on motors with embedded PTC temperature sensors
  • Current imbalance trip and biasing of the thermal register
  • Electronic shear pin trip (overcurrent) with trip delay
  • Equipment ground fault trip and monitoring
  • Load loss trip (under current) with trip delay

Positive Displacement Pump Softstart

  • 20-600 HP
  • NEMA 4 enclosure
  • Service Entrance Rated
  • 230/460V Rated
  • Advanced Motor Protection
  • Current Rated 500% for 60 Seconds
  • Full Panel Surge protection
  • CB with Door Mounted Lockable Handle
  • Integral Full Rated Bypass Contactor with X-Line Mode
  • Accepts inputs for up to 7 Murphy swtiches
    • Individually Selectable for NO or NC
    • Interposing Relays Isolation on Murphy Inputs
    • Vibration Trip, Crank Case Oil Level, Low Pressure, High Pressure, Gearbox Oil Level, Lubricator Oil Level
  • Front Panel Indicators and Keypad
  • Start/Stop, HOA, Reset buttons
  • Indicating LED’s on I/O board (troubleshooting aid)

Across-Line Motor Starters

Three Phase – 230 Volt Definite Purpose Motor Starters

* 24 Volt coil available for all ratings

ESP200 Solid State Electronic Overload Relays

  • Selectable Trip Classes: 5, 10, 20 and 30
  • Manual, automatic, and remote reset
  • Phase loss protection – trips in less than 3 seconds
  • Phase unbalance protection – trips based on trip class selected (minimize temperature rise of the motor on a asymmetrical three-phase system)
  • Thermal memory (prevents restarting the motor when it is hot)
  • Ground fault protection – trips 60% of motor current
  • Ambient insensitive (prevents nuisance tripping)
  • FLA dial with wide adjustment range – 4:1 ratio
  • One NO and one NC contacts standard
  • Self-powered – no separate source required
  • Self protected in short circuit condition
  • No heaters required (saves cost and eliminates time for installation)
  • Test button – tests electronics
  • Conformally coated circuit board
  • Repeat trip accuracy <1%
  • Visible trip indicator
  • DIN Rail Mounted
  • Touch-safe terminals
  • Removable terminals

Contactors & Overload Relays

Definite Purpose AC Contactors

  • Cushioned, isolated coil
  • Reinforced thermalset polyester housing
  • Large terminals for easy wiring
  • Power termination options (screw terminals or lug terminals with quick connects)

Applications

  • Air conditioning and heating
  • Ventilating and refrigeration
  • Food and beverage industries
  • Pump and compressor
  • Hoists and cranes
  • Pool and spa
  • Conveyors
  • Welding

Manual Motor Starters / Protectors Class 11 – 3RV ▪ Three-Phase

  • ON/OFF rotary handle with lockout and visible trip indication
  • Adjustment dial for setting to motor FLA (standards only)
  • Low voltage protection (LVP) option
  • Short circuit trip at 13 times the maximum setting of the FLA dial or rated current
  • Ambient compensated up to 140 °F
  • Phase loss sensitivity
  • Test trip function
  • LVP option meets OSHA requirements
  • UL Listed
  • CSA Certified

Pressure Switches, Alternator Relays, Drum Controllers

HUBBELL Pressure Switches – Air

69J/69M Series

  • 1/4’’ Female NPT with pulsation orifice
  • 69J Rotatable unloader
  • 69M Stationary unloader

HUBBELL Drum Controllers

  • Start, stop and change the speed and/or rotating direction of reversible AC and DC motors.
  • Variety of handle styles are available as field modifications.
  • Magnetic chuck switches are also available
  • Variety of enclosures NEMA 1, NEMA 3R and NEMA 4
  • Easy terminal access
  • Heavy duty contacts

Safety & Transfer Switches

VBII Safety Switches General Duty ▪ 240 Volt

  • Highly visible easy-to-grip handle
  • Visible blade construction
  • Door opens greater than 180°
  • Quick-make, quick-break mechanism
  • 200% optional neutrals (200-600 Amps)
  • Positive two and three point mounting
  • Padlock style cover latch and handle
  • Generous wiring gutter
  • Front removable lugs which can easily be converted to copper body or compression type lugs
  • Lugs suitable for copper or aluminium at 60°C or 75°C
  • Replacement parts

Double Throw Transfer Switches

  • All 2 and 3 pole double throw switches are suitable for use as service equipment
  • When protected with class H fuses, switches are rated for use on systems up to 10,000 A
  • When protected with class R or class T fuses, switches are rated for use on systems up to 100,000 A
  • Switches can be used to connect a single source of power to either of two loads
  • A cover interlock is provided on all ampere ratings
  • The operating handle may be padlocked in the OFF position

Pilot Devices

Pushbutton Complete Units (Operator and Contact Block) Class 52 ▪ Watertight / Oiltight ▪ 30 MM Heavy Duty

  • Heavy duty rated NEMA A600 contacts
  • Bifurcate movable contacts
  • Octagonal mounting nuts
  • Boots not required for NEMA 4
  • Heavy duty plastic buttons resist oils and corrosion
  • Meets type 1, 3, 4, 12, 13 and automotive standards (oil and dust tight)
  • Building block construction of contact blocks make possible many circuitry combinations
  • Durable one piece castings
  • Silver contacts carry heavy duty ratings
  • Touch-safe terminals
  • Neoprene gasket seals mounting hole
  • UL listed file #E22655
  • CSA certified file #LR6535

Maintained Toggle Operator

  • Heavy duty rated NEMA A600 contacts
  • Bifurcate movable contacts
  • Octagonal mounting nuts
  • Boots not required for NEMA 4
  • Heavy duty plastic buttons resist oils and corrosion
  • Meets type 1, 3, 4, 12, 13 and automotive standards (oil and dust tight)
  • Building block construction of contact blocks make possible many circuitry combinations
  • Chrome plating covers exposed metal parts
  • Durable one piece castings
  • Silver contacts carry heavy duty ratings
  • Touch-safe terminals
  • Neoprene gasket seals mounting hole
  • Positive indexing selectors
  • UL listed file #E22655
  • CSA certified file #LR6535

Shaft Mount Reducers

The “Original” Shaft Mount Reducer

  • 15:1 and 25:1 ratios
  • Box sizes 2-10
  • Tapered bushing type (bushing not included)
  • Premium quality ball and tapered bearings – double lip seals
  • Shafts and gears manufactured from high grade steel, case hardened and precision ground to AGMA standards
  • Industrial grade all-cast iron housings protect gearing for life
  • Extended gear centers and tooth contact
  • Metal reinforced double lip, spring loaded oil seals
  • Dimensional drop-in for all major makes
  • Torque arm included
  • 2-year warranty

The “Ultimate” Shaft Mount Reducer

  • 9:1, 15:1 and 25:1 ratios
  • Box sizes 2-9
  • Tapered bushing type (bushing not included)
  • Premium quality ball and tapered bearings – double lip seals
  • Shafts and gears manufactured from high grade steel, case hardened and precision ground to AGMA standards
  • Industrial grade all-cast iron housings protect gearing for life
  • Extended gear centers and tooth contact
  • Metal reinforced double lip, spring loaded oil seals
  • Dimensional drop-in for all major makes
  • Torque arm included
  • Made in Taiwan (highest level of manufacturing expertise)
  • 3-year warranty

Worm Gear Reducers – Cast Iron

Flange Input-Shaft Output

  • 5:1 – 60:1 ratios
  • Box sizes 1.33 – 3.25
  • One piece # Fc20 all cast iron housing
  • Embedded double-lip oil seals
  • Double bearings used on both shaft ends
  • Anti-rust primer applied inside and outside gearbox
  • S45C carbon steel shafts
  • Albc3 aluminum – bronze gear
  • Interior oil channel guide directly and constantly lubes bearings
  • Tapered roller bearing on output and input shafts
  • All angle – radiused mounting holes
  • Air dry special black paint
  • Shaft sleeve protects all shafts
  • Compact design – compact space capability
  • Units filled with Mobil # SHC634 synthetic oil
  • Universal interchangeability
  • 1-year warranty

Shaft Input-Shaft Output

  • 5:1 – 60:1 ratios
  • Box sizes 1.33 – 3.25
  • One piece # Fc20 all cast iron housing
  • Embedded double-lip oil seals
  • Double bearings used on both shaft ends
  • Anti-rust primer applied inside and outside gearbox
  • S45C carbon steel shafts
  • Albc3 aluminum – bronze gear
  • Interior oil channel guide directly and constantly lubes bearings
  • Tapered roller bearing on output and input shafts
  • All angle – radiused mounting holes
  • Air dry special black paint
  • Shaft sleeve protects all shafts
  • Compact design – compact space capability
  • Units filled with Mobil # SHC634 synthetic oil
  • Universal interchangeability
  • 1-year warranty

Worm Gear Reducers – Aluminum

  • 7.5:1 – 100:1 ratios
  • Box sizes 30 – 90
  • Aluminum alloy housing for light weight design
  • Hardened worm shaft for increased durability
  • Two bearings on input and output shafts
  • NEMA motor input flanges
  • All units filled with synthetic oil
  • No vent plug or breather needed – maintenance free reducer
  • Double lip oil seals prevent leakage
  • Multiple mounting holes for all angle mounts
  • Epoxy paint applied to inside and outside of reducer to protect against rust
  • Hollow output bores with plug-in output shafts
  • 1-year warranty

Inline Helical Gear Reducers

  • 2:1 – 120:1 ratios (other ratios available as custom orders)
  • Box sizes 37 – 147
  • Built to German Institute for Standardization (DIN) for high efficiency, high strength and low noise
  • All cast iron housings for unquestioned strength and reliability
  • Wide range of ratios from 2:1 to 120:1
  • Horsepower range from 1/4 HP to 75 HP
  • Gears are precision processed for better rotation and quieter operation
  • Gearbox flanges are designed to accept NEMA C-Face electric motors
  • Drop-in for most major European-produced Inline reducer brands
  • 2-year warranty

Gearmotors

  • 1-75 HP
  • 5:1 – 120:1 ratios
  • 3-year warranty

Motor:

  • TEFC enclosure
  • Dual rated service factor
  • 1.15 for 40°C / 1.0 for 65°C
  • Class F insulation with Class N varnish
  • Rigid base
  • Premium Efficiency, meets or exceeds EISA 2007 requirements defined in NEMA MG-1 table 12-12

Gearbox:

  • All cast iron housings for unquestioned strength and reliability
  • Gears are precision processed for better rotation and quieter operation
  • No coupling necessary
  • Drop-in for most major European-produced Inline reducer brands

Accessories – Parts

WorldWide Slide Bases

  • Bases are provided with washers
  • Bases are painted with an oven-baked primer for better contact of customer’s paint
  • All “D” bolts (motor mounting bolts) are welded into position to prevent spinning and “dropping” from slots
  • All “D” bolts are fixed to the exact foot pattern of the motor to aid in easier motor installation
  • Exact drop-in replacement for all major make slide bases
  • Single adjusting screws for frames 56-145T
  • Double adjusting screws for frames 182T-505T

Hyundai Premium Efficiency Motor C-Flange and D-Flange Kits